|
displaying posts 1 to 17 of 17
| Author | Subject: 4.8 final drives |
 mabgti
NV motors  Location: Bham tunnel @7400rpm Registered: 28 Aug 2003 Posts: 9,127 Status: Offline |
Post #1
Discuss, as i know of a company that can make them.. ________________________________________ Team Supercharged Gti-6NV Motorsport Automotive Performance Tuning 0121 448 7515 ECU Remapping/ DPF removal VAG/BMW Diag and Option Coding Peugeot Planet ECU coding/transponder programming etc www.nvmotorsport.com Facebook Page Project S6 |
 Posted 13th Nov 2011 at 10:37
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
so do I  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Nov 2011 at 15:34
|
|
|
cwspellowe
Seasoned Pro  Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline |
Post #3
So do I, they've a special offer on them at the minute too  From what i've seen, good with high rev limits but top speed drops by 25mph or so at 7200rpm, and you only reach 60mph quite high in 3rd. Depends on the application I guess? ________________________________________ Bye bye Sundance Kid |
|
Posted 13th Nov 2011 at 17:12
|
|
|
atterz
Seasoned Pro  Location: Stafford Registered: 18 Feb 2011 Posts: 1,134 Status: Offline |
Post #4
Similar advantage to the 106 wallyes? Geared for acceleration? Good for a sprint car i guess?________________________________________ owain wrote: A GTI-6 with a good dashboard and the seats down can outsprint an E46 M3 in July. |
|
Posted 13th Nov 2011 at 18:59
|
|
|
smegal
Seasoned Pro  Location: Leeds Registered: 26 Dec 2005 Posts: 5,940 Status: Offline |
Post #5
What about a longer final drive?________________________________________ Ex SC-6Now in a Megane R26 |
|
Posted 13th Nov 2011 at 19:32
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #6
why would you want to do 200 mph in a French biscuit tin??  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Nov 2011 at 19:45
|
|
|
atterz
Seasoned Pro Location: Stafford Registered: 18 Feb 2011 Posts: 1,134 Status: Offline |
Post #7
Top speed with the box is about 170mph? f*ck that. Insane.________________________________________ owain wrote: A GTI-6 with a good dashboard and the seats down can outsprint an E46 M3 in July. |
|
Posted 13th Nov 2011 at 20:08
|
|
|
smegal
Seasoned Pro Location: Leeds Registered: 26 Dec 2005 Posts: 5,940 Status: Offline |
Post #8
welshpug! wrote: why would you want to do 200 mph in a French biscuit tin?? I keep trying to change up at 5k in 6th ________________________________________ Ex SC-6Now in a Megane R26 |
|
Posted 13th Nov 2011 at 21:14
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #9
stop driving everywhere at 90 then ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 13th Nov 2011 at 21:28
|
|
|
cwspellowe
Seasoned Pro Location: Calderbank Registered: 19 Jul 2009 Posts: 6,496 Status: Offline |
Post #10
smegal wrote: welshpug! wrote: why would you want to do 200 mph in a French biscuit tin?? I keep trying to change up at 5k in 6th Surely you'd want to be changing DOWN then?  ________________________________________ Bye bye Sundance Kid |
|
Posted 13th Nov 2011 at 21:45
|
|
|
bigbadbowen
Seasoned Pro  Location: Winchester Registered: 21 Nov 2003 Posts: 13,752 Status: Offline |
Post #11
I had a 4.8 fd in my Tarmac box she would top out at about 125 flat out in 6th at 8k revs  |
|
Posted 13th Nov 2011 at 21:56
|
|
|
mabgti
NV motors Location: Bham tunnel @7400rpm Registered: 28 Aug 2003 Posts: 9,127 Status: Offline |
Post #12
welshpug! wrote: so do I who's that then? ________________________________________ Team Supercharged Gti-6NV Motorsport Automotive Performance Tuning 0121 448 7515 ECU Remapping/ DPF removal VAG/BMW Diag and Option Coding Peugeot Planet ECU coding/transponder programming etc www.nvmotorsport.com Facebook Page Project S6 |
|
Posted 17th Nov 2011 at 14:34
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #13
http://www.bacciromano.com/I think these people may do as well though nothing specific shown on their website. http://avanti-motorsport.com/gearbox1.htm not sure if gripper do one, they do for the MA, pretty sure Quaife used to as well but likely they would charge lots or want to do a group buy to guarantee numbers. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 17th Nov 2011 at 15:26
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #14
oh and there's some pretty pics here toohttp://krs-competition.pagesperso-orange.fr/bte306.htm ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 17th Nov 2011 at 15:29
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #15
bigbadbowen wrote: I had a 4.8 fd in my Tarmac box she would top out at about 125 flat out in 6th at 8k revs Who bought that in the end? ________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 17th Nov 2011 at 22:40
|
|
|
info@pug1off.com
Newbie  Location: Brackley Registered: 24 Sep 2011 Posts: 46 Status: Offline |
Post #16
We have these on the shelf and they are on special offer until the end of this month at £840 down from £900 inc VAT, check out link below and the general forum for other special offers.http://www.shop.pug1off.com/product_info.php/cPath/31_91/products_id/510 ________________________________________ N/A XU10J4RS = 302.1 bhp / 184.2 lb.ftTurbo XU10J4RS = 500.2 bhp / 443 lb.ft USC 2011 Double Class winners N/A FWD 0-60 winners at TRAX 2011 Developers, stockists and installers of superior upgrades for the Peugeot 306 GTi6 & Rallye, including:- *NEW!!!!! 4.8:1 final drive for BE3/6 *BBM Group N engine mounts *Cat Cams and vernier pulleys *Emerald ECU's *Jenvey throttle bodies *Uprated gear linkages and short shifts *Quaife & Tran-X LSD's for BE3/6 *Tar-Ox brake discs and Ferodo DS2500 pads *Solid rear beam mounts *21-25mm torsion bars *25mm rear anti roll bars |
|
Posted 18th Nov 2011 at 11:25
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #17
who makes them for you?________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 18th Nov 2011 at 11:40
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.