Post #1
HiI am after a xsara vts Phase 2 fuel pressure regulator, must be phase 2 3.5 Bar.
Thanks
|
displaying posts 1 to 4 of 4
| Author | Subject: xsara vts Phase 2 fuel pressure regulator |
 toddy
Newbie  Location: Sheffield Registered: 13 Jun 2007 Posts: 29 Status: Offline |
I am after a xsara vts Phase 2 fuel pressure regulator, must be phase 2 3.5 Bar. Thanks |
 Posted 28th Sep 2011 at 19:32
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,757 Status: Offline |
Post #2
The same regulator is used on most petrol Peugeots and Citroens of that age.________________________________________ Rich |
|
Posted 28th Sep 2011 at 19:47
|
|
|
mad_dave23
Senior User  Location: Farmer land Registered: 27 May 2006 Posts: 819 Status: Offline |
Post #3
I have one on the 6 im breaking £15 delivered.Dave |
|
Posted 28th Sep 2011 at 21:46
|
|
|
osm2121
Regular  Location: Montevideo Registered: 02 Nov 2012 Posts: 229 Status: Offline |
Post #4
Sorry to bring back to life the thread, but I had to take out the inlet manifold, and I want to paint the inyectors rail, and also change the pressure regulator.I wanted to ask if it would improve in any way, putting that 3.5 bar Xsara II Press Reg, (if it actually is 3.5bar, code is 198532 right?) on a std engine, rather than the 3 bar it has. Or if it would be just the same. Thanks |
|
Posted 15th Feb 2014 at 23:49
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.