Author	Subject: v6 engine
mrdeey Regular Location: nearerthanuthink Registered: 14 Feb 2011 Posts: 200 Status: Offline	Post #1 hi, has anyone fitted the ES9J4S , 210bhp engine into the 306 ? ________________________________________ now new booted , boosted and flying again!
Posted 19th Jul 2011 at 03:47 Profile

24seven Seasoned Pro Location: Derby Registered: 05 Oct 2005 Posts: 6,221 Status: Offline	Post #2 There are a few V6 conversions knocking around. There's a thread with pictures of one on the FIRST PAGE of the general forum if you'd looked. /thread ________________________________________ Ph1 306 GTi 6 | RX8 231 S1 | YBR 125 Cafe Racer | MT-03 660
Posted 19th Jul 2011 at 03:53 Profile

bigbadbowen Seasoned Pro Location: Winchester Registered: 21 Nov 2003 Posts: 13,752 Status: Offline	Post #3 mrdeey wrote: hi, has anyone fitted the ES9J4S , 210bhp engine into the 306 ? Thats the later type multiplex style lump from the 406 and is a fooker to get to run. the older 190bhp engine is easier to install
Posted 19th Jul 2011 at 04:06 Profile

mr swampy s16 **BAD SELLER** Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline

Post #4 bigbadbowen wrote: mrdeey wrote: hi, has anyone fitted the ES9J4S , 210bhp engine into the 306 ? Thats the later type multiplex style lump from the 406 and is a fooker to get to run. the older 190bhp engine is easier to install and it doesnt take much to get the older one running close to the 210bhp mine is around that figure now , three rolling roads gave three slightly different reseults 206, 212 and 209 got plans to get a few more from it whilst its off the road for a rebuild!

Posted 19th Jul 2011 at 04:09 Profile

welshpug! Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline	Post #5 yup, a lad on the club-306 forum has done one, runs on emerald. installation of both lumps is much the same, its just the management and throttle body that needs sorting rather than simply wiring in with the earlier engine. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.com Bring on the Trumpets.
Posted 19th Jul 2011 at 15:43 Profile

mrdeey Regular Location: nearerthanuthink Registered: 14 Feb 2011 Posts: 200 Status: Offline	Post #6 Don't suppose youhave a link for that do you , as I would like to have a chat with him about instalation , cheers ________________________________________ now new booted , boosted and flying again!
Posted 19th Jul 2011 at 18:05 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.