➜ advanced search
Add a more detailed reply Start a new thread in the Exterior forum
Home -> Forums -> Exterior -> URGENT WINDOW HELP

displaying posts 1 to 8 of 8

Author Subject: URGENT WINDOW HELP
mjstones

Seasoned Pro

Location: straight outta compton

Registered: 16 Oct 2007

Posts: 1,233

Status: Offline
Post #1
hi, is there any way to get the little metal clip that comes with the rubber window holder grommet in. i've been trying for ages and it's making me so angry i almost 'lee306v6'd' my car. little f*cking piece of shit. can i just leave it off or will the window pop out of the grommet etc? i'm assuming i need it cos it came with it but i can't get any kind of angle or leverage to put clip it through

________________________________________

Never underestimate the power of De-Nile.

Friday afternoon car, built in France.... Ninja

306gti6.com Stickers available, pm me for details. or email MjStones83@hotmail.com

Sticker Thread with pics


Posted 25th May 2011 at 21:10
Profile
ballardpaul

Seasoned Pro

Location: Croydon

Registered: 22 Jul 2008

Posts: 4,135

Status: Offline
Post #2
Is this the grommet that attaches to the green clip?

________________________________________

Phase 2 Blaze GTi 6 (Standard) Sold
Phase 3 Supercharged China GTi 6 (249.8 BHP) Sold
Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold
Nissan 350Z (300 BHP)
Posted 25th May 2011 at 21:47
Profile
mjstones

Seasoned Pro

Location: straight outta compton

Registered: 16 Oct 2007

Posts: 1,233

Status: Offline
Post #3
that's the one. except my clip is grey, but the one at the bottom centre(ish) of the glass.

________________________________________

Never underestimate the power of De-Nile.

Friday afternoon car, built in France.... Ninja

306gti6.com Stickers available, pm me for details. or email MjStones83@hotmail.com

Sticker Thread with pics


Posted 25th May 2011 at 23:45
Profile
ballardpaul

Seasoned Pro

Location: Croydon

Registered: 22 Jul 2008

Posts: 4,135

Status: Offline
Post #4
Yeah I had a bit of trouble with it. Just keep at it, it'll go in eventually. I think I had the window half way up rather than at the bottom which Is what I tried first of all but I couldn't do it that way. Can't really help anymore was years ago when I had to do mine.

________________________________________

Phase 2 Blaze GTi 6 (Standard) Sold
Phase 3 Supercharged China GTi 6 (249.8 BHP) Sold
Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold
Nissan 350Z (300 BHP)
Posted 26th May 2011 at 03:04
Profile
mjstones

Seasoned Pro

Location: straight outta compton

Registered: 16 Oct 2007

Posts: 1,233

Status: Offline
Post #5
ah, bad news then! i was hoping for some sort of expert tip!! i can't get the damn thing in, wherever i try it there's something in the way.

________________________________________

Never underestimate the power of De-Nile.

Friday afternoon car, built in France.... Ninja

306gti6.com Stickers available, pm me for details. or email MjStones83@hotmail.com

Sticker Thread with pics


Posted 26th May 2011 at 03:39
Profile
sixysix

Seasoned Pro

Location: London

Registered: 27 Mar 2006

Posts: 2,659

Status: Offline
Post #6
I found it harder to get the old clip off than the other way around.

Put the bung in through the glass so that you know roughly where the two tiny holes are that the clip needs to go through.

Line the pin up with the holes in the bung and push like feck to get the clip to pop over the grey plastic notch to secure it in place.

Just move window into a position which makes it easy for you to get to Smile

________________________________________

My Pugrun 2007/2009 video clips
Take a look

Pugrun 2007...Lose yourself Laugh

Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010).

PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit).

P1 Diablo red 6 gone but not forgotten Sad
Posted 26th May 2011 at 05:27
Profile
dangti6

aka JKshooter

Location: Taunton, Somerset

Registered: 15 Jun 2006

Posts: 10,305

Status: Offline
Post #7
Suprised this is causing and issue.

As mentioned, getting the thing off can be fiddly the first time you try it.

Best way of getting it off is putting a screwdriver pointing up in the bottom of the door under the clip, and then pushing the window down so it slides out.

Putting it back on, it just slides over. If you are having trouble getting the semi circle bit to expand, put some pliers between the top of the bung and open them to expand the clip and push from the bottom. Should ping over it then.

________________________________________

  • Senior Test Automation Engineer for the 306GTi6 Owners Club Forum Wizard

    • Posted 26th May 2011 at 15:52
    Profile
    sharvey44

    Senior User

    Location: East London

    Registered: 22 Feb 2010

    Posts: 795

    Status: Offline
    Post #8
    i found it easier to put bung in the window, push the spring clip all the way in and then whilst holding the bottom of the window+bung in place pull it onto the green clip. because of the shape of the green clip the spring clip should expand enough for it to clip on properly.

    best to do it with the window about ¾ down as then you can get your hands in properly in the big gap....

    job jobbed

    ________________________________________

    Ph2.5 Nile - Slowly trying to de-East London it and restore to former glory...
    Built on the 9 Febuary 1999 - Tuesday's car..is full of pace? Wink

    Currently looking slightly molested due to some c*nt trying to get into it.. Sad

    According to the forum Social Worker, because I work in IT, I am socially retarted..
    Posted 26th May 2011 at 16:14
    Profile
    Home -> Forums -> Exterior -> URGENT WINDOW HELP

    All times are GMT. The time is now 08:57

    The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

    Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
    No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.