This is my 6th 306 and hopefully my final one.

Welcome to "Project Tic Tac"





I have bought this of Vetch and was previously owned by Spiky so i now the cars a good 'un but needs some love to restore it to its former glory.

Plans for it are

Interior - New dash silvers,gearknob and steering wheel and a small repair to the drivers boulster

Bodywork - Full machine polish and touch up a few minor marks,fit the refurbished Cyclones i have with Nearly new Michelin Exaltos.

Enginework - Just a Pipercross Viper as it has already been fitted with Kent PT81's and remap from the wizard Wayne Schofield and running 194 BHP

Suspension - complete overhaul with Billie B4's and eibach springs and all new TRE's BJ's ETC

Keep them peeled chaps for updates

wonder if there will be more progress on this thread than the last project thread

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Here we go!

Started off today by emptying the boot off all the bits Stuart (Vetch) bought for her but never fitted.



Heres all the goodies for me to fit which are:

New Bilstein B4 shocks
New droplinks
New track rod ends
New balljoints
New strut top bearings
New rear beam mounts
New Bilstein rear shocks ZX 16v jobbies



Then i moved onto the mods.over the last few months/years of breaking 6's ive built up a collection of bits that could be used on future projects and best of all cost me nothing!

First up was changing the side repeater bulbs from the standard orange ones some nice silver ones.

Before


After


Then moved onto removing the horrid Red "GTI" badges off the doors

Before


After


Next up was the rusty wprer blades which were frankly pure w*nk!Quick rummage in the shed reveals some nice Bosch jobbies for her.

Before


After


That was enough for outside so i moved inside to do a little bit of freshing up.First thing to be tackled was the nasty dash fascia,it looks like some blind monkey with a rattle can had sprayed the original one so that just had to go!

I prefer the phase 2 Brushed Aluminuim effect one over the phase 3 Silver item before anyone (Thug) says its the wrong one for the car.

Also moved the aftermarket alarm LED into the original location next to the air vents.

Before


After


Next up was knob,after being through many mens hands over the last 10 years it was battered and even peeling !Luckily the last 6 i broke had a mint standartd one so in it goes.

Before


After



Steering wheel was next on the agenda as the original one was more flaky than Ed's dandruff!

before




After




Last little job was the jack holder.the jack was being secured by the CD changer holder and just wouldnt do.

Before


After



Next up is taking the rear spoiler off and replacing it or a nice one ive got somewhere and fitment of the refurbished Cyclones with new exaltos that are blocking up my mums summerhouse

how fast were you going when that third pic from bottom was taken?

________________________________________

230 hp 2.1 16v XU 205 rallye on jenveys Project thread here
309 3dr K20 Type R

Are those side lights legal? I thought you had to use orange bulbs if you had clear lenses?

________________________________________

Still watching you...

I'd rather hang a carbon dipped ball bag from my mirror than put that tat your flogging on my car



About 108mph and was about to shift into 4th.



Correct

Whats the story with these?

________________________________________

Bang'in 7 gram rocks!
I have one gear, GO!

Intended to work with 21mm torsion bars, and they didn't get the spec wrong like they did with the first generation of 205/306 dampers, though tat has now changed and they are a vast improvement.

BNE 1932 is the ZX/Xsara part number IIRC, 205/306 ones are BNE 1931.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Have the pistons been pocketed to accommodate the cams?

Or you think that not necessary?

________________________________________

Team: Moonstone GTI-6™
Team: Working air-con™

Aint got a clue to be honest,all i now it goes very well



Cheers mate,wens will be the next update for her as im off from work for the day

Wondered when you would show your face with this one

When Spiky had it up for sale my friend Owen wanted to buy it back, but you beat him to it

Lovely car mate, sure she will be back to tip top condition very soon with it in your hands

________________________________________

Chris
1999 China Gti6 Supercharged [Fun car] >>Project Thread<<
2000 Bianca 306 Diesel [Work runabout]

yeah, i hated the noise too, hence i put the std one on, but that broke

________________________________________

Do you need a 205 > 306 gti6 plug and go engine loom? PM ME

TORQUES for all your braided fuel line needs

MY YouTube Videos'

SUPERCHARGED 205 GTI6.... are you Fooking nuts!.... ummmm YIP

268+BHP and 860kg = FUN