|
displaying posts 1 to 2 of 2
| Author | Subject: New Alloys for my Rallye |
 roddo
Newbie  Location: Hounslow Registered: 16 Mar 2008 Posts: 21 Status: Offline |
Post #1
Looking at new alloys for my Cherry Rallye. like the look of the Team Dynamics 17" Tornados, but will they fit my Rallye ?These are the specs Rim Width: 7J Rim Structure: One Piece Rim Diameter: 17 Brand: Team Dynamics Offset: 38 Number of Studs: 4 Metal Type: Aluminium Stud Diameter: 100/108 Will they fit my Rallye ? If not what do I need to know ? Cheers Roddo |
 Posted 23rd Jan 2011 at 17:20
|
|
|
sixysix
Seasoned Pro  Location: London Registered: 27 Mar 2006 Posts: 2,659 Status: Offline |
Post #2
They will fit but the 306 offset is between 15 - 19 so you will need to use a 20mm hubcentric spacer and longer bolts to fit properly.You may also need to trim the rear arch liners as well. Also make sure the centre bore of the wheels are 65.1 Most go for 16" wheels here as a good compromise to handling and comfort  ________________________________________ My Pugrun 2007/2009 video clipsTake a look Pugrun 2007...Lose yourself  Xbox Live ID: Marksixysix (Forza 3, Forza 4 PES 2010, COD 6/MW2, WRC 2010). PSN ID: MarkSixysix ( DiRT 3 GT5, NFS:Hot pursuit). P1 Diablo red 6 gone but not forgotten  |
|
Posted 23rd Jan 2011 at 18:05
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.