|
displaying posts 1 to 2 of 2
| Author | Subject: Removing aircon compressor. |
 405gti6
Junior User  Location: Norway Registered: 05 Jan 2011 Posts: 70 Status: Offline |
Post #1
I'm sure this has been answered insanely many times before... I did try to search, but didn't really end up being any smarter! What is needed to belt up the PAS and generator after I removed the aircon? Tensioner and a new roller from any XU10J4 non AC is what I've concluded with. Is that right?Probably not, but would a XU10J2 setup fit on this block? Thank you. ________________________________________ XU10J4RS powered 405 . |
 Posted 18th Jan 2011 at 21:59
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
the tensioners from any non a/c XU10J4R engined vehicle.________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 18th Jan 2011 at 22:06
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.