|
displaying posts 1 to 3 of 3
| Author | Subject: Phase II OEM Clarion code input locked? |
 sprinter
Newbie  Location: winchester Registered: 21 Jun 2009 Posts: 10 Status: Offline |
Post #1
Hi all, as above, left my lights on yesterday and battery was as flat as a pancake. Jump started it ok but my OEM Clarion radio asked for the code, which I thought wrongly I knew by heart, so I put the wrong code in. Now the headunit just has 4 dashes across the screen and won't take a code. I do have the correct code it just won't let me put it in! is there anyway to reset it?Cheers, james |
 Posted 29th Oct 2010 at 17:23
|
|
|
davidmartin
Seasoned Pro  Location: Beautifull Ystalyfera Registered: 21 Oct 2006 Posts: 3,315 Status: Offline |
Post #2
quote from the FAQIf you are unable to enter the code, carry out the following: 1. Turn key to the first position. The screen should show " ---- " 2. Press and hold the radio button (wave sign). The screen should change to " ====" 3. Now wait until "Code In" is diplayed. This could be some time (90 mins) ________________________________________ pet hate, the cat |
|
Posted 29th Oct 2010 at 20:17
|
|
|
sprinter
Newbie Location: winchester Registered: 21 Jun 2009 Posts: 10 Status: Offline |
Post #3
Much appreciated, sorry next time will read the FAQ, might give the battery a chance to recharge a bit before trying that  |
|
Posted 29th Oct 2010 at 21:28
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.