|
displaying posts 1 to 3 of 3
| Author | Subject: Need to block Cam oil feed help |
 benn25
Regular  Location: In the woods Registered: 14 Jan 2009 Posts: 303 Status: Offline |
Post #1
Received these 6 cams and have been advised that i need to block up the oil feed so I can put in my xsi. Im presuming its the one on the right? However I could be wrong. Also whats the best method to block this up. Would a screw be fine for the job? Plus does it need to be flush to the oil feed hole? Cheers  |
 Posted 26th Oct 2010 at 00:31
|
|
|
swiftyboi006
Seasoned Pro  Location: Maidenhead Registered: 12 Apr 2010 Posts: 2,110 Status: Offline |
Post #2
Ye it is the right 1 im sure the left 1 recycles the oil fumes into the inlet manifold. Thats if im talking about the same thing :-)________________________________________ cherry p1.....SOLD (regreting this)blaze p2.....why did i buy this SOLD Black p3  |
|
Posted 2nd Nov 2010 at 03:02
|
|
Rich E
Forum Admin Location: Hertfordshire Registered: 27 Apr 2005 Posts: 7,759 Status: Offline |
Post #3
You don't need to plug the oil feed. The effect on oil pressure and circulation will be very small indeed.swiftyboi006 wrote: Ye it is the right 1 im sure the left 1 recycles the oil fumes into the inlet manifold. Thats if im talking about the same thing :-) Not even close! ________________________________________ Rich |
|
Posted 2nd Nov 2010 at 17:08
|
|
The Peugeot GTi-6 & Rallye Owners Club Ltd - Registered in England & Wales - Reg No: 07410694 - ©2023 all rights reserved.
Please Note : The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club Ltd or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy and legal information
