Author	Subject: Flwheel bolt thread size
jeffers Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline	Post #1 I have done a quick search but can't find what i need to know, anyone know the thread size of the flywheel bolts? just stripping an engine and it has no flywheel but i need to lock the crank to remove the crankshaft pulley bolt. Thanks. ________________________________________ Team Running Engine again! Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!
Posted 9th Sep 2010 at 15:52 Profile

midlife Seasoned Pro Location: Colne, Lancashire Registered: 13 Mar 2006 Posts: 7,544 Status: Offline	Post #2 I used a cordless impact wrench & it came off a doddle ________________________________________ Get used to seeing the yellow one !!! Team 330™ Team "no front end or engine" Team "LIMITED EDITION" I live for the 306 sticker Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine 203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine
Posted 9th Sep 2010 at 16:22 Profile

jeffers Forum Admin Location: Leeds Registered: 14 Dec 2003 Posts: 3,702 Status: Offline	Post #3 midlife wrote: I used a cordless impact wrench & it came off a doddle Hmm i'll try it but my impact wrench is only a 14v one and does not tend to like goin over maybe 65 nm but i'll give it a whirl! ________________________________________ Team Running Engine again! Team Negative Camber! My Budget track engine build thread! Now appearing at a Trackday near you!!
Posted 9th Sep 2010 at 17:19 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.