VXR centre exit - Exhausts Forum - Peugeot 306 GTi-6 & Rallye Owners Club

displaying posts 1 to 25 of 79

Pages (4): [1] 2 3 .. last

Author

Subject: VXR centre exit

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #1

I've been planning this for a while now! im in two minds here.. i'm about 80% sure i want a centre exit exhaust to increase the size of my rear box, as the short space means its one loud thing on boost!

firstly i dont know whether to put it in the bumper just below number plate or cutout on the bottom!

The OE tailpipe gap will be filled over rather than using a shocking rear dturbo bumper LOL

Most of you will shout chav... but my reasons behind it are valid, i promise Angel

Obviously with the box LARGER at parallel to the back bumper, yes i lose the spare wheel that i never had LOL

________________________________________

Team Supercharged Gti-6

NV Motorsport
Automotive Performance Tuning
0121 448 7515
ECU Remapping/ DPF removal
VAG/BMW Diag and Option Coding
Peugeot Planet ECU coding/transponder programming etc
www.nvmotorsport.com
Facebook Page
Project S6

Posted 26th Aug 2010 at 05:24

Profile

midlife

Seasoned Pro

Location: Colne, Lancashire

Registered: 13 Mar 2006

Posts: 7,544

Status: Offline

Post #2

Chav

________________________________________

Get used to seeing the yellow one !!! Meh

Team 330�

Team "no front end or engine"
Team "LIMITED EDITION" I live for the 306 sticker Smug

Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine Smug

203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine

Posted 26th Aug 2010 at 05:09

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #3

wayne it goes with the peugeot badge... i kept that on the front as to debadge it is chaving... LOL

________________________________________

Posted 26th Aug 2010 at 05:10

Profile

midlife

Seasoned Pro

Location: Colne, Lancashire

Registered: 13 Mar 2006

Posts: 7,544

Status: Offline

Post #4

There has got to be a way to increase the size of the silencer without encroaching on that lovely void between the beam & the bumper....

Cool

________________________________________

Get used to seeing the yellow one !!! Meh

Team 330�

Team "no front end or engine"
Team "LIMITED EDITION" I live for the 306 sticker Smug

Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine Smug

203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine

Posted 26th Aug 2010 at 05:14

Profile

ultimate 6 Banned!

Location: birmingham

Registered: 30 Jan 2010

Posts: 318

Status: Offline

Post #5

Shouts out chav. Personally i,d go for a discrete side exit.

________________________________________

Cossack grey gti 6

Posted 26th Aug 2010 at 05:15

Profile

ryangti6

Seasoned Pro

Location: Pontypool

Registered: 01 Sep 2006

Posts: 1,839

Status: Offline

Post #6

I dont get it...

How is that box any bigger than a Magnex or similar?

Tbh I dont think it would look very good either

________________________________________

Ryan

Posted 26th Aug 2010 at 05:16

Profile

greenbelt

Seasoned Pro

Location: How's Life In London?

Registered: 23 Apr 2006

Posts: 1,961

Status: Offline

Post #7

^ ^ ^ That wheel is on the wrong side of the car!

________________________________________

Standard Black 6
Black HBSC6 Smoke

Posted 26th Aug 2010 at 05:19

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #8

ryangti6 wrote:

I dont get it...

How is that box any bigger than a Magnex or similar?

Tbh I dont think it would look very good either

"Obviously with the box LARGER at parallel to the back bumper" Roll eyes

________________________________________

Posted 26th Aug 2010 at 05:27

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #9

just fit a bigger centre box.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 26th Aug 2010 at 05:34

Profile

rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #10

greenbelt wrote:

^ ^ ^ That wheel is on the wrong side of the car!

As for the centre exit exhaust i dont think it would look great

________________________________________

Just Drive It

Posted 26th Aug 2010 at 16:43

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #11

how bout twin pipe adjacent side of bumper?

________________________________________

Posted 26th Aug 2010 at 16:44

Profile

midlife

Seasoned Pro

Location: Colne, Lancashire

Registered: 13 Mar 2006

Posts: 7,544

Status: Offline

Post #12

I'm sure the BTCC 306's used a larger back box which exited the opposite side of the bumper to the cutout Geek

________________________________________

Get used to seeing the yellow one !!! Meh

Team 330�

Team "no front end or engine"
Team "LIMITED EDITION" I live for the 306 sticker Smug

Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine Smug

203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine

Posted 26th Aug 2010 at 16:59

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #13

Yeh but they didnt have the standard plastic fuel tank did they?

________________________________________

Posted 26th Aug 2010 at 17:00

Profile

rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #14

mabgti wrote:

how bout twin pipe adjacent side of bumper?

I think it would look better but it would have to be done very well not to look chavvy. Shouldnt twin exits only be used for performance reasons though? Think of the extra weight Crazy

________________________________________

Just Drive It

Posted 26th Aug 2010 at 17:03

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #15

I need the weight on the back as i found out yesterday Whistle

btcc twin centre!

i like this bit like the clio sport, obviously with a neater cutout.

________________________________________

Posted 26th Aug 2010 at 17:04

Profile

ryangti6

Seasoned Pro

Location: Pontypool

Registered: 01 Sep 2006

Posts: 1,839

Status: Offline

Post #16

mabgti wrote:

ryangti6 wrote:

I dont get it...

How is that box any bigger than a Magnex or similar?

Tbh I dont think it would look very good either

"Obviously with the box LARGER at parallel to the back bumper" Roll eyes

Ah right, I missed that bit LOL

I just looked at the pic and couldnt see what you meant.

Surely the easiest option would be what Welshpug has suggested if it is just for noise purposes.

________________________________________

Ryan

Posted 26th Aug 2010 at 22:50

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #17

not all the btcc cars were like that, have a look at carl's one.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 27th Aug 2010 at 00:53

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #18

yeh.. but most ran a fuel tank on n/s/r hence box had to be on o/s

what if the vxr tailpipe was matt black?

________________________________________

Posted 27th Aug 2010 at 18:09

Profile

rallyestyle

Seasoned Pro

Location: London

Registered: 23 Jul 2003

Posts: 14,990

Status: Offline

Post #19

Have you any pics of the rear of your 6 mabs? Maybe someone could do a half decent photoshop Yes

What style will the tailpipe be, oval? Id be tempted just to flip the exit side of the exhaust if its all about space.

________________________________________

Just Drive It

Posted 27th Aug 2010 at 18:15

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #20

ASTRA VXR tailpip mate... either below bumper with a little cutout, higher up in the bumper under number plate, or remover number plate and have it there?

This tailpipe

________________________________________

Posted 28th Aug 2010 at 02:50

Profile

midlife

Seasoned Pro

Location: Colne, Lancashire

Registered: 13 Mar 2006

Posts: 7,544

Status: Offline

Post #21

I guess you could use something like the 206 gti 180 back box Dunno

________________________________________

Get used to seeing the yellow one !!! Meh

Team 330�

Team "no front end or engine"
Team "LIMITED EDITION" I live for the 306 sticker Smug

Team 0-60 in 6.44 & standing qtr in 14.808 @ 94.55mph all with std engine Smug

203bhp Corolla T-Sport daily driver stealthier than Kwai Chang Caine

Posted 28th Aug 2010 at 03:00

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #22

getting inlet and outlet on same side of box is tricky and adds to total pipe length, not good for peak power

________________________________________

Posted 28th Aug 2010 at 03:04

Profile

welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #23

get a smaler tailpipe, you dont need that cannon Thumbs up

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 28th Aug 2010 at 04:40

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #24

smaller centre exit? just seen a lambo SV in london city! inspiration!!!! Big grin

________________________________________

Posted 28th Aug 2010 at 06:46

Profile

mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #25

another...

________________________________________

Posted 29th Aug 2010 at 03:31

Profile

Pages (4): [1] 2 3 .. last

All times are GMT. The time is now 10:13

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.