Post #1
Would bike carbs inprove bhp? and are they easy to set up? Cheers 
________________________________________
Live for the pug life style!
|
displaying posts 1 to 6 of 6
| Author | Subject: GSXR BIKE CARBS? GOOD PLAN OR BAD PLAN? |
 oldschooldude
Newbie  Location: trowbridge Registered: 12 Apr 2010 Posts: 10 Status: Offline |
|
 Posted 15th May 2010 at 23:41
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
bike carbs / bike bodies on a cobbled together manifold _ Linkage - meh.Jenveys and the like, pretty good, but the manifolds off the shelf aren't that well though out IMO Bike bodies or Jenveys on a properly manufactured inlet manifold, like you'd get from Colin Satchel / Sandy Brown - WIN. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 15th May 2010 at 23:50
|
|
|
tannerman
Senior User  Location: POOLE Registered: 28 Apr 2010 Posts: 583 Status: Offline |
Post #3
welshpug! wrote: bike carbs / bike bodies on a cobbled together manifold _ Linkage - meh. Jenveys and the like, pretty good, but the manifolds off the shelf aren't that well though out IMO Bike bodies or Jenveys on a properly manufactured inlet manifold, like you'd get from Colin Satchel / Sandy Brown - WIN. sounds fookin awesome aswell ________________________________________ DO YOU HAVE PROBLEMS WITH BUM FLUFF |
|
Posted 15th May 2010 at 23:51
|
|
|
lotek
Seasoned Pro  Location: Berkshire Registered: 04 Dec 2007 Posts: 6,107 Status: Offline |
Post #4
tibi has a thread in the projects section.take a look at it. annoyingly though he wont post up what gains it made. im not convinced it made any. |
|
Posted 15th May 2010 at 23:54
|
|
|
daveyboy
aka Jim Davey  Location: Southampton Registered: 01 Oct 2007 Posts: 8,648 Status: Offline |
Post #5
Nothing wrong with the Longmans inlet manifold from Jenvey.________________________________________ R H Davey Welding Supplies. I sell new and used welding equipment in the Hampshire area. I take on welding jobs in the evenings, ally casting repairs are one of my specialities but I can weld pretty much anything. PM me with your requirements.Some of my services: (See my for sale threads) Engine mount/chassis repair Solid Beam Mounts BACK IN PRODUCTION Harness bars |
|
Posted 17th May 2010 at 02:07
|
|
|
miles
Seasoned Pro  Location: Ringwood Registered: 28 Dec 2002 Posts: 3,433 Status: Offline |
Post #6
Having almost done a back to back with a std GTi6 inlet and 45mm T/B's abit on the 1.9 Mi16 engine, both engine's made the same power and torque, thou at slightly different peak's running on Emerald,So fitting carb's would loose Power unless you get the ignition side of thing's mapped. ________________________________________ 306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a fewRoad, Track and Race/Rally car preparation to your personal requirements, Full Workshop & Diagnostic Facilities New and Second parts, from Plugs to Turbo's We now also carry out Routine Servicing www.pugracing.com & FB Page, https://www.facebook.com/PugRacing Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop 2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way, |
|
Posted 17th May 2010 at 03:35
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.