displaying posts 1 to 21 of 21

Author Subject: SOLD!!! VEMS standalone ECU (plug and play) SOLD!!!
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #1
VEMS standalone ECU for the 306 GTI6 / Xsara VTS

It's a plug and play ECU, there's no need for additional wiring / harness.



It comes with the usual stuff found on VEMS Genboard v.3 and:

-wideband lambda function
-EGT


It uses all the original sensors, and what is really rare - it can deal with the coil on plug ignition design the XU10J4RS has.

It was mapped for a near standard ph.1 Xsara VTS, so it has a great basemap for any XU10J4RS engine!


It's like this:

DP-engineering VEMS PnP for the XU10J4RS

this certain unit wasn't made by DP-engineering, but the hungarian VEMS distributor

(price at DP-engineering ~1150)



This can run the latest VEMS firmware, and it can run up to 4 different maps (say, one for petrol, one for E85, one for race etc...)


price now: £450

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 13th May 2011 at 12:25
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #2
BUMP - price reduced to £850

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 12th Apr 2010 at 13:51
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #3
BUMP - price reduced to £750

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 7th Jul 2010 at 18:49
mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #4
has this got any maps with it?

________________________________________

Team Supercharged Gti-6

NV Motorsport
Automotive Performance Tuning
0121 448 7515
ECU Remapping/ DPF removal
VAG/BMW Diag and Option Coding
Peugeot Planet ECU coding/transponder programming etc
www.nvmotorsport.com
Facebook Page
Project S6
Posted 8th Jul 2010 at 00:22
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #5
"At the moment it's in a running Xsara VTS, so it even comes with a good base map for the RS engine

LOL


it has been mapped by the most rated hungarian tuner, he worked for over days on it to make it perfect for that car, and my friend had to pay such huge amount of money that he did not let me know Big grin

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 8th Jul 2010 at 00:37
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #6
BUMP!!!!!!

Huge price drop to £600!!!!!!!

This has to go! There's no way you can get a standalone ECU cheaper than this!!!!! And you don't have to make a new wiring harness, and buy new sensors, and it even works with the OEM Pug. coils!!!

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 3rd Mar 2011 at 01:03
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,817

Status: Offline

Post #7
DTA S40 is £475, uses all stock sensors, but as you say you do need to spend more than an S40 to use sequential spark Smile (something like S60, which is £800)


Is this VEMS unit Plug and play in an o.e 55 pin 3 row ecu plug? no additional Wideband controller required?

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 3rd Mar 2011 at 01:17
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #8
Just look at the pictures Mate. Smile You can see that it has the original 306 GTI6 ECU plug - that's why it's plug and play.

There is no need for a new engine harness, it uses the original sequential spark system, and the wideband controller is built into the unit, so no additional controller needed!


Please let me know how much a similar spec'd DTA would cost? And how much would be to have a wiring harness made?

There's a reason why Dp-engineering sells these for 980GBP...

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 3rd Mar 2011 at 17:10
mabgti

NV motors

Location: Bham tunnel @7400rpm

Registered: 28 Aug 2003

Posts: 9,127

Status: Offline

Post #9
shipping price to uk?

________________________________________

Team Supercharged Gti-6

NV Motorsport
Automotive Performance Tuning
0121 448 7515
ECU Remapping/ DPF removal
VAG/BMW Diag and Option Coding
Peugeot Planet ECU coding/transponder programming etc
www.nvmotorsport.com
Facebook Page
Project S6
Posted 3rd Mar 2011 at 21:30
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #10
It was 39GBP to post two 406 Brembo calipers with pads and brake lines from Hungary to the UK, so it should be under that!

Just let me know if you want this, and I'll calculate the exact posatge fees Wink

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 3rd Mar 2011 at 22:57
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #11
had a chat with my friend, and now it's 600GBP including postage to UK!

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 7th Mar 2011 at 00:09
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #12
bump!

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 9th Mar 2011 at 01:30
samjl

Junior User

Location: Stockport

Registered: 17 Feb 2011

Posts: 85

Status: Offline

Post #13
VEMS is awesome, alot of people with very high power Jap car's running VEMS.
Posted 9th Mar 2011 at 02:27
docwra

Regular

Location: Cambridge UK

Registered: 16 Jun 2009

Posts: 217

Status: Offline

Post #14
My drift car is mapped on VEMS and it is indeed very good - its a MAS based system for a start Big grin

The chap who mapped mine charged me £200 for the day, including roller use IIRC, nopw that you definitely arent going to beat Smile

________________________________________

Lots of Nissans, two 306 GTI-6's. They are catching up! Big grin
Posted 9th Mar 2011 at 17:40
ricknorbat

Newbie

Location: Asker

Registered: 26 Mar 2008

Posts: 13

Status: Offline

Post #15
I use this Vems PnP. Very happy with it. I got an gti6 with 240 HP !
Posted 10th Mar 2011 at 18:50
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #16
BUMP!!!

price reduced to £550!!!!!!

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 5th May 2011 at 00:40
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #17
BUMP BUMP BUMP!!!

price reduced to £500!!!!!!

this must go - we need funds for racing!

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 13th May 2011 at 12:26
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #18
BUMP AGAIN!!!!

price now: £450

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 7th Sep 2011 at 10:43
specter

Regular

Location: Graz

Registered: 05 Apr 2011

Posts: 103

Status: Offline

Post #19
interested but not a upgraded membership atm

infos to gerald.schalli@gmx.net please
Posted 7th Sep 2011 at 13:31
fabio306

Newbie

Location: Erechim/Brazil

Registered: 28 Aug 2010

Posts: 13

Status: Offline

Post #20
I'm interested
Still for sale?
Posted 14th Mar 2012 at 18:06
vts_tibi

Seasoned Pro

Location: Nuneaton

Registered: 27 Apr 2007

Posts: 1,194

Status: Offline

Post #21
fabio306 wrote:
I'm interested
Still for sale?


Sorry Mate, has been sold to specter this week...

________________________________________

VTS
best 60' : 2.272
best 1/8 ET : 9.375 @ 74.42mph
best 1/4 ET: 14.603 @ 97.047mph

Team Trackday™
Posted 16th Mar 2012 at 11:22

All times are GMT. The time is now 12:33

The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.