|
displaying posts 1 to 3 of 3
| Author | Subject: Help please. |
 r.a.m. 106
Junior User  Location: Ballina Registered: 04 Nov 2007 Posts: 60 Status: Offline |
Post #1
I have to change a gearbox in a 306 hdi as it decided to implode and i have a few be3 boxes out of 405 diesel's. The boxes will fit but it says that the hypoid gearset is 19 x 70 in the hdi box and the other ones seem to be 19 x 77 or so. What does this mean? Will it affect the engine rev to box speed. eg 2200 rpm in 5th is 100kph. Thanks Richard. |
 Posted 28th Feb 2010 at 04:20
|
|
|
r.a.m. 106
Junior User Location: Ballina Registered: 04 Nov 2007 Posts: 60 Status: Offline |
Post #2
Also does anyone know where i could get a custom 6th gear set cut for a be3-6 box. Thanks Richard. |
|
Posted 28th Feb 2010 at 04:21
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #3
look one thread down.http://www.306gti6.com/forum/showthread.php?id=120152&page=1 ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 28th Feb 2010 at 04:27
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.