|
displaying posts 1 to 3 of 3
| Author | Subject: s16 people - breather question |
 razzario
Junior User  Location: cleckheaton Registered: 11 Nov 2009 Posts: 95 Status: Offline |
Post #1
Guys i'm after a pic of the breather setup on a standard s16, basically mine has been setup at some point so that air cis sucked into the crankcase through one of those aluminium filter thingies, the filter is postioned near the throttle body. I believe this is causing some condensation in the crankcase/breather system as i get som mayo in the filler cap/breather stem but my oil/water consumption is zero and i'm not mixing oil or water at all  |
 Posted 9th Dec 2009 at 03:41
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #2
can't help with the pics I'm afraid but from waht you're saying there's only one hose missing, that's from the oil filler pot to the intake elbow that's not present.have a search on the forum though, I do remember a few engine bay pics of S16's. do you drive pointless short journeys to the corner shop etc all the time?  its a common issue with these, a clean out and a decent blast to get it nice and warm usually sort its for a while, it'll come back if you only do short journeys though. ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 9th Dec 2009 at 03:55
|
|
|
ballys16
Regular Location: Godollo Registered: 05 Mar 2009 Posts: 247 Status: Offline |
Post #3
razzario wrote: Guys i'm after a pic of the breather setup on a standard s16, basically mine has been setup at some point so that air cis sucked into the crankcase through one of those aluminium filter thingies, the filter is postioned near the throttle body. I believe this is causing some condensation in the crankcase/breather system as i get som mayo in the filler cap/breather stem but my oil/water consumption is zero and i'm not mixing oil or water at all Some engine bay pics clicky ________________________________________ XSi 8V -> S16 |
|
Posted 10th Dec 2009 at 00:38
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.