Post #1
2x adapters, 2x bells and 24x high tensile bolts and 24x all metal locknuts.Anodised in Black
Requires 17" wheels, Brake pipe extensions or longer braided hoses and 4x 406 V6 Caliper Bolts.
|
| Author | Subject: SOLD: 330x28mm V6 406 Brembo fitting kit one off price |
 ash
Six Addict  Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Anodised in Black Requires 17" wheels, Brake pipe extensions or longer braided hoses and 4x 406 V6 Caliper Bolts. |
 Posted 20th May 2016 at 16:19
|
|
|
anderoo
Seasoned Pro  Location: Castle Cary Registered: 05 Oct 2004 Posts: 9,222 Status: Offline |
Post #2
Pm'd.  ________________________________________ Pics of my 6My 6 on Google Video thanks to coxy306Xsi |
|
Posted 30th Sep 2009 at 23:05
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #3
Sent!4 More kits available. |
|
Posted 6th Nov 2009 at 00:29
|
|
|
mr swampy s16
**BAD SELLER**  Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #4
I can supply one piece braided lines to suit at |
|
Posted 6th Nov 2009 at 03:09
|
|
|
anderoo
Seasoned Pro Location: Castle Cary Registered: 05 Oct 2004 Posts: 9,222 Status: Offline |
Post #5
Got my set fitted today so here's a few pictures for anyone else thinking about it.  Old BD Combi's vs new Hi Spec 330mm Discs:  Test Fitting:   Fitted:  I'll take better pics when I get round to washing the car, First impressions are very good, I'm bedding it in so taking it easy but the feel is excellent and there seems to be loads of stopping power. ________________________________________ Pics of my 6My 6 on Google Video thanks to coxy306Xsi |
|
Posted 9th Nov 2009 at 03:26
|
|
|
wilyoldave
Seasoned Pro  Location: Yeovil Registered: 21 Apr 2007 Posts: 1,642 Status: Offline |
Post #6
Looks good Andrew! Might be going a similar route as well!Wheels are lush too! Wheres the clones? ________________________________________ No more peugeots Snap - no more RS clio Now Ph1 RS clio |
|
Posted 9th Nov 2009 at 04:01
|
|
|
anderoo
Seasoned Pro Location: Castle Cary Registered: 05 Oct 2004 Posts: 9,222 Status: Offline |
Post #7
Sold them just after getting the SL's, won't fit now anyway.  ________________________________________ Pics of my 6My 6 on Google Video thanks to coxy306Xsi |
|
Posted 9th Nov 2009 at 13:47
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #8
Four more sets ready to go anodised in red. |
|
Posted 14th Feb 2010 at 17:10
|
|
|
lost4words
Senior User  Location: Leicester Registered: 11 Nov 2008 Posts: 716 Status: Offline |
Post #9
Sorry to be a rather large pain again.My memory is aweful and i ment to save it last time! My appologies. I have the V6 406 Calipers... What would i need to get this kit fitted? Appox prices aswell please (If you want to pm it to me that would be fine thanks )Also this is just for fronts? As IIRC you said rears are fine as is? ________________________________________ Team 'No Longer A 306 Owner'Team 'VTEC' Black Honda Civic 'EP3' Type R Moonstone 306 Gti-6 - Died at 82k Black 306 HDI - Sold 08/08/2010 at 102,229 |
|
Posted 15th Feb 2010 at 23:34
|
|
|
stu
Seasoned Pro  Location: Milton Keynes Registered: 22 Aug 2006 Posts: 5,525 Status: Offline |
Post #10
You will need the kit that Ash is selling in this thread for |
|
Posted 15th Feb 2010 at 23:46
|
|
|
lost4words
Senior User Location: Leicester Registered: 11 Nov 2008 Posts: 716 Status: Offline |
Post #11
Thanks for your help Stu.How much are the discs and pads roughly? I didnt know 330mm discs would fit the V6 Brembo caliper? Btw Ash do you do any other colours?  My Calipers are Black not sure what colour will go best with a Manstone car tho  Hopefully these dont squeel like a pig in a vice either?  ________________________________________ Team 'No Longer A 306 Owner'Team 'VTEC' Black Honda Civic 'EP3' Type R Moonstone 306 Gti-6 - Died at 82k Black 306 HDI - Sold 08/08/2010 at 102,229 |
|
Posted 16th Feb 2010 at 03:33
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #12
Cheers Stu  I doubt I still get a discount at CompBrake as I've not bought anything from them for a while; I do get a 10% discount at HiSpec and they are happy for direct buyers of my 310mm rotors to also have the discount, I'll need to ask them if they will do the same on these 330mm rotors. With no discount the 330mm rotors are |
|
Posted 16th Feb 2010 at 05:03
|
|
|
lost4words
Senior User Location: Leicester Registered: 11 Nov 2008 Posts: 716 Status: Offline |
Post #13
________________________________________ Team 'No Longer A 306 Owner'Team 'VTEC' Black Honda Civic 'EP3' Type R Moonstone 306 Gti-6 - Died at 82k Black 306 HDI - Sold 08/08/2010 at 102,229 |
|
Posted 16th Feb 2010 at 05:11
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #14
Part Number : MDB1882Cost : |
|
Posted 16th Feb 2010 at 05:26
|
|
|
lost4words
Senior User Location: Leicester Registered: 11 Nov 2008 Posts: 716 Status: Offline |
Post #15
Thanks Ash!!! Ahh i see, i was wondering if it was something like that. You learn something new everyday as they say! Whats the advantage of having it as a rotor ie fitting the bell? Is it just so it all fits? Sorry if thats a stupid question... Is this in a FAQ anywhere? I take it these shouldnt squeel then according to one of your other threads? ________________________________________ Team 'No Longer A 306 Owner'Team 'VTEC' Black Honda Civic 'EP3' Type R Moonstone 306 Gti-6 - Died at 82k Black 306 HDI - Sold 08/08/2010 at 102,229 |
|
Posted 16th Feb 2010 at 06:24
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #16
The bell can be aluminium so you get less weight + better heat transfer away from the disc.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 16th Feb 2010 at 06:29
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #17
Cheers Phil. That's right they don't squeal due to the different resonance of alloy/steel. |
|
Posted 16th Feb 2010 at 14:11
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #18
I have one set anodised in Red which is unused but one bell has two tiny 8mm scratches. |
|
Posted 15th Mar 2010 at 22:43
|
|
|
mr swampy s16
**BAD SELLER** Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #19
I can dn braided lines to suit these at |
|
Posted 15th Mar 2010 at 23:05
|
|
|
mabgti
NV motors  Location: Bham tunnel @7400rpm Registered: 28 Aug 2003 Posts: 9,127 Status: Offline |
Post #20
mr swampy s16 wrote: I can dn braided lines to suit these at
________________________________________ Team Supercharged Gti-6NV Motorsport Automotive Performance Tuning 0121 448 7515 ECU Remapping/ DPF removal VAG/BMW Diag and Option Coding Peugeot Planet ECU coding/transponder programming etc www.nvmotorsport.com Facebook Page Project S6 |
|
Posted 16th Mar 2010 at 00:51
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #21
I can do professionally made braided brake hoses with banjo's and banjo bolts for |
|
Posted 16th Mar 2010 at 04:52
|
|
|
mr swampy s16
**BAD SELLER** Location: out and about Registered: 22 Oct 2003 Posts: 10,550 Status: Offline |
Post #22
mabgti wrote: mr swampy s16 wrote: I can dn braided lines to suit these at
|
|
Posted 16th Mar 2010 at 23:15
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #23
A: I don't thinks it's appropriate for you to hawk your sales on my for sale thread.B: I've never said that your product is inferior or that many people have been unhappy with your products. C: My product is purchased via Hydrahose in Chelmsford and costs me |
|
Posted 17th Mar 2010 at 13:29
|
|
|
ash
Six Addict Location: Chelmsford Registered: 25 Mar 2003 Posts: 7,520 Status: Offline |
Post #24
2 Fitting kits left £295; 1 Fitting kit slightly marked as shown here (2 tiny scratches near the top) £245ash has attached the following image: |
|
Posted 17th Apr 2010 at 12:44
|
|
|
ballardpaul
Seasoned Pro  Location: Croydon Registered: 22 Jul 2008 Posts: 4,135 Status: Offline |
Post #25
That's a good price Ash just for some scratches, surely you can't really see them when the disc are on?________________________________________ Phase 2 Blaze GTi 6 (Standard) SoldPhase 3 Supercharged China GTi 6 (249.8 BHP) Sold Phase 3 Supercharged Diablo GTi 6 (443 BHP)Sold Nissan 350Z (300 BHP) |
|
Posted 17th Apr 2010 at 16:13
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.