|
displaying posts 1 to 3 of 3
| Author | Subject: External diameter of throttle body |
 tbk77
Newbie  Location: Ireland Registered: 07 May 2008 Posts: 28 Status: Offline |
Post #1
Im after the external diameter of the throttle body as I have to buy a new elbow to try stop my BMC hanging so low. I tried searching to no avail and its cold and wet outside so i thought someone here might know  I presume the 76mm is the internal diameter so I would need what in around an 80mm silicone tube/ elbow to fit it? thanks in advance |
 Posted 26th Aug 2009 at 09:43
|
|
|
aaron6
Seasoned Pro  Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline |
Post #2
tbk77 wrote: Im pretty sure i brought 76mm Internal diameter pipe to fit over the 76mm outside diameter body.Im after the external diameter of the throttle body as I have to buy a new elbow to try stop my BMC hanging so low. I tried searching to no avail and its cold and wet outside so i thought someone here might know I presume the 76mm is the internal diameter so I would need what in around an 80mm silicone tube/ elbow to fit it? thanks in advance  ________________________________________ See the sheer power and might of the lesser known burrowing owl. |
|
Posted 26th Aug 2009 at 13:28
|
|
|
singingfish
Seasoned Pro  Location: Hemel Hempstead Registered: 01 Nov 2004 Posts: 2,426 Status: Offline |
Post #3
78mm i thought.75-80mm pipe fits it. ________________________________________ defected to VAGFaithful Rallye looking for a home. [sniffs] |
|
Posted 26th Aug 2009 at 19:48
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.