Post #126
so what was the verdict on the ap coilovers then?________________________________________
Magnex Cat Back,3 inch tail pipe, K&N High Flow Filter, lowered 40mm on Weitec springs+dampers.
|
| Author | Subject: Ap sportfahrwerke coilovers? |
 lewis07
Regular  Location: Wales Registered: 24 May 2008 Posts: 123 Status: Offline |
|
 Posted 20th Jun 2009 at 21:33
|
|
|
lewis07
Regular Location: Wales Registered: 24 May 2008 Posts: 123 Status: Offline |
Post #127
bump________________________________________ Magnex Cat Back,3 inch tail pipe, K&N High Flow Filter, lowered 40mm on Weitec springs+dampers. |
|
Posted 24th Jun 2009 at 06:22
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #128
i think from looking on other forums they are a good coilover for the money  bit cheaper than KW V2's anyway  ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 24th Jun 2009 at 14:17
|
|
|
phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #129
I have one set of the production Foxes boarding a plane next week, and he's bringing a briefcase full of valve shims on as hand luggage, just in case I want to do a little more tweaking. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 19th Jul 2009 at 05:42
|
|
|
clen666
Seasoned Pro  Location: Co. Durham Registered: 12 Feb 2009 Posts: 2,401 Status: Offline |
Post #130
 ________________________________________ Team 'unintentional rat look' |
|
Posted 19th Jul 2009 at 05:44
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #131
Wayne, get your car back together, testing time!________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 19th Jul 2009 at 05:59
|
|
puglover
Banned! Location: Far out there Registered: 08 Jun 2006 Posts: 6,095 Status: Offline |
Post #132
my cars together  ish |
|
Posted 19th Jul 2009 at 06:17
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #133
He'll sit on you! ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 19th Jul 2009 at 06:19
|
|
|
puglover
Banned! Location: Far out there Registered: 08 Jun 2006 Posts: 6,095 Status: Offline |
Post #134
 |
|
Posted 19th Jul 2009 at 06:21
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #135
All's quiet on the Colne front, I think he's preparing an ambush....________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 19th Jul 2009 at 06:32
|
|
|
puglover
Banned! Location: Far out there Registered: 08 Jun 2006 Posts: 6,095 Status: Offline |
Post #136
probably last i heard hed blown his mates welder up. He should be due anytime now though with his car. If hes not skint |
|
Posted 19th Jul 2009 at 06:44
|
|
|
rikky
🦔 Location: cheshire Registered: 28 Feb 2004 Posts: 26,793 Status: Offline |
Post #137
wonder what he's up to  keeping tabs on this thread to see how phil's stuff materialises, and how my money deteriorates  ________________________________________ 306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges gti6 inlet manifold badges | 306 rear boot badges (p2/p3) winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club] |
|
Posted 20th Jul 2009 at 05:35
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #138
Funny how that happens, I make shiny stuff, everyones pocket money goes down I don't know where it ends up 'cause it certainly ain't here I think Waynes making some sort of twin supercharged, 900bhp, spaceframed supercar with a 306 shell thrown in ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 20th Jul 2009 at 05:40
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #139
Cleared customs today  ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 04:15
|
|
|
puglover
Banned! Location: Far out there Registered: 08 Jun 2006 Posts: 6,095 Status: Offline |
Post #140
 |
|
Posted 11th Aug 2009 at 04:17
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #141
Someone's special order novelty knobs should be arriving soon too...________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 04:21
|
|
|
puglover
Banned! Location: Far out there Registered: 08 Jun 2006 Posts: 6,095 Status: Offline |
Post #142
i love to fiddle with knobs  |
|
Posted 11th Aug 2009 at 04:24
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #143
Specially when they covered in low friction oil...I'll need some of that for when HMRC send the bill... ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 05:18
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #144
Mmmm, I got me some shiny anodised aluminium and chrome... ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 19:47
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #145
  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 11th Aug 2009 at 20:00
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #146
Mine, all mine! Gotta do some machining work on the casings and res. before pictures anyway. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 20:01
|
|
|
welshpug!
Capt Pedantic Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #147
________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 11th Aug 2009 at 20:02
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #148
Some optional adjustable bits.  ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 11th Aug 2009 at 20:10
|
|
|
ken
Senior User  Location: wokingham Registered: 28 Mar 2007 Posts: 905 Status: Offline |
Post #149
so if i was to purchase these coilovers would i need to uprate the top mounts i take it??i read good things about ap!! ________________________________________ Team Black Rallyexbox live - Xx 7 kenny 7 xX |
|
Posted 20th Aug 2009 at 21:28
|
|
|
rallyestyle
Seasoned Pro  Location: London Registered: 23 Jul 2003 Posts: 14,990 Status: Offline |
Post #150
Did anyone actually buy a set of these?________________________________________ Just Drive It |
|
Posted 8th Jul 2010 at 21:20
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.