|
| Author | Subject: C5 steel wheels |
 phillipm
Seasoned Pro  Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #26
It's probably got a peugeot logo on it.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
 Posted 23rd Mar 2009 at 04:34
|
|
|
cress87
Seasoned Pro  Location: Norwich Registered: 30 Mar 2007 Posts: 11,360 Status: Offline |
Post #27
It's got a Peugeot and a Fiat badge on it.  ________________________________________  You feed beefburgers to swans.  I may have been speeding Mr Policeman but [a] I live for the 306 and [b] did you see that dog? omfg |
|
Posted 23rd Mar 2009 at 04:38
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #28
No, the fiat badge will have fallen off and burst into flames already.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 23rd Mar 2009 at 04:39
|
|
|
cress87
Seasoned Pro Location: Norwich Registered: 30 Mar 2007 Posts: 11,360 Status: Offline |
Post #29
 As much as I'd like to sit here and talk about violins/Peugeots/Fiats all night, I have a broken Peugeot on the drive that will not fix itself tomorrow.  ________________________________________ You feed beefburgers to swans. I may have been speeding Mr Policeman but [a] I live for the 306 and [b] did you see that dog? omfg |
|
Posted 23rd Mar 2009 at 04:44
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #30
Meh, don't worry about it, mine's still borked.________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 23rd Mar 2009 at 04:45
|
|
|
cress87
Seasoned Pro Location: Norwich Registered: 30 Mar 2007 Posts: 11,360 Status: Offline |
Post #31
You started team "raised 250mm on axle stands".  ________________________________________ You feed beefburgers to swans. I may have been speeding Mr Policeman but [a] I live for the 306 and [b] did you see that dog? omfg |
|
Posted 23rd Mar 2009 at 04:49
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #32
Hey, it's off the axle stands now, it actually moved under its own power yesterday.100 yards. Then sprung a coolant leak... I'm now starting team "raised 50mm due to ridiculously long springs"  There's about 150 kilos of knackered parts in the back, hence the squat! ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 23rd Mar 2009 at 05:41
|
|
|
Carl Chambers
Seasoned Pro  Location: suffolk/norfolk Registered: 10 Sep 2004 Posts: 2,897 Status: Offline |
Post #33
mechanical_repairs wrote: Why are these wheels actually wanted just because they are lighter? Carl because they are not really made of steal, they are alloy, hence why they are lighter. A scrappy near here was telling me about them as he has a set! He has already sold them though! I didnt believe him till he got a magnet out to prove it! Just seems mad, why Citroen make them of alloy and make them look like stealys and then put wheel trims on! ________________________________________ Carl Chambersemail; pugnacious.peugeot@yahoo.co.uk . C.M.CHAMBERS CARS Peugeot Specialist Tel; 01379 586101 after 6.30 or 07889 082466 anytime. pugsport-racing.co.uk |
|
Posted 23rd Mar 2009 at 20:41
|
|
|
cress87
Seasoned Pro Location: Norwich Registered: 30 Mar 2007 Posts: 11,360 Status: Offline |
Post #34
How odd.  ________________________________________ You feed beefburgers to swans. I may have been speeding Mr Policeman but [a] I live for the 306 and [b] did you see that dog? omfg |
|
Posted 23rd Mar 2009 at 20:43
|
|
|
phillipm
Seasoned Pro Location: Rotherham Registered: 15 Oct 2006 Posts: 20,607 Status: Offline |
Post #35
Because they use them to transport the cars on and for delivery, the lighter they are the less they cost them in transport.Be aware though, that some of the early sets had problems with cracking around the wheel bolt holes. ________________________________________ - Bespoke rollcages/additions/adjustments. Half cages right up to complete custom spaceframes - MSA/FIA spec, CDS, ROPT, T45, etc - PM meEmail me! Custom-made polybushes available - need an odd size or fitment? - anything from batch work to one-off pieces. |
|
Posted 23rd Mar 2009 at 20:48
|
|
|
vts_tibi
Seasoned Pro  Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #36
phillipm wrote: Because they use them to transport the cars on and for delivery, the lighter they are the less they cost them in transport. Be aware though, that some of the early sets had problems with cracking around the wheel bolt holes. yeah, that's why you need the "PS815011" wheels p.s.: do not spam my thread you lot  ________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 23rd Mar 2009 at 22:55
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,817 Status: Offline |
Post #37
they do them in other sizes too  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 23rd Mar 2009 at 23:08
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #38
welshpug! wrote: they do them in other sizes too other sizes? 7J ?  or 16" ?________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 23rd Mar 2009 at 23:15
|
|
|
andy-goodwin
Regular  Location: Waterlooville Registered: 09 Apr 2007 Posts: 228 Status: Offline |
Post #39
If they did 16 x 7s I'd have a set right now! |
|
Posted 23rd Mar 2009 at 23:57
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #40
well today I had a look around the "hungarian E-gay" and there was a bloke who told me he only has 16" C5 "steel" wheels... so it can even happen!________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 24th Mar 2009 at 01:11
|
|
|
cress87
Seasoned Pro Location: Norwich Registered: 30 Mar 2007 Posts: 11,360 Status: Offline |
Post #41
vts_tibi wrote: p.s.: do not spam my thread you lot Sorry.  ________________________________________ You feed beefburgers to swans. I may have been speeding Mr Policeman but [a] I live for the 306 and [b] did you see that dog? omfg |
|
Posted 24th Mar 2009 at 01:15
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #42
________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 24th Mar 2009 at 01:17
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #43
EDIT!Today I've bought one of these mighty wheels! (other 3 will arrive on Monday hopefully!) Oh My God!!!!!! You just can't believe these until you pick one up!!!!! Nearly half the weight of the original steel wheel!!!! On a scale it weighed in at about 4.5kg, and the original steelie at around 8.7kg (these are not exact numbers but will do for me )so around 4kg lighter / corner = 16kg saved!!!!!!! and to quote Puglover: "i read somewhere that every 1kg extra on a wheel is about the same as adding about 7-10kg to the cars overall weight" I'm chuffed! ________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 5th Apr 2009 at 23:52
|
|
|
xsara27
Junior User  Location: Gatwick Registered: 10 Jun 2008 Posts: 52 Status: Offline |
Post #44
A 5 cornered car? |
|
Posted 5th Apr 2009 at 18:50
|
|
|
monty-69
Senior User  Location: Colne Registered: 02 Jul 2006 Posts: 790 Status: Offline |
Post #45
Only use the proper c5 wheel bolts with the spinning washers, torqued up to the c5 settings. |
|
Posted 5th Apr 2009 at 19:44
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #46
xsara27 wrote: A 5 cornered car?  sorry.... typo edited the post above ________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 5th Apr 2009 at 23:52
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #47
monty-69 wrote: Only use the proper c5 wheel bolts with the spinning washers, torqued up to the c5 settings. that only applies to the flat-surfaced wheels! these are the revised C5 steel wheels, with tapered bolt holes!  that's why I was after the "PS815011" wheels! The others need a flat washer, but those steelies prone to crack. ________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 5th Apr 2009 at 23:55
|
|
|
rich-6
Seasoned Pro  Location: Bottoming out! Registered: 06 May 2007 Posts: 5,306 Status: Offline |
Post #48
Werent there a couple of different batches of these released? You lot wanting the earlier type as the later ones are heavier? and one of them was a recall Seems to ring a bell from my old days of Saxo ownership ________________________________________ RIP Pete Sims |
|
Posted 6th Apr 2009 at 00:30
|
|
|
dommo
Regular  Location: Stoke Registered: 12 Mar 2008 Posts: 320 Status: Offline |
Post #49
Does anyone know how heavy the 1.9 205 GTi wheels are? They almost look like steels but are alloy.Probably a dumb question  ________________________________________ '99 306 Meridian TD with Bosch fuel pump - Cheap veg oil motoring'99 Xantia Activa turbo - not cheap veg oil motoring  Goes around corners well though |
|
Posted 6th Apr 2009 at 01:09
|
|
|
vts_tibi
Seasoned Pro Location: Nuneaton Registered: 27 Apr 2007 Posts: 1,194 Status: Offline |
Post #50
rich-6 wrote: Werent there a couple of different batches of these released? You lot wanting the earlier type as the later ones are heavier? and one of them was a recall Seems to ring a bell from my old days of Saxo ownership As far as I know the C5 only came out with two different types of steel-looking alloys. The first type needed the flat washer, and the revised is the tapered. The newere C5 switched to 16' as far as I know! dommo wrote: Does anyone know how heavy the 1.9 205 GTi wheels are? They almost look like steels but are alloy. Probably a dumb question there were two types AFAIK: Italian made Speedline - 8 kg French made SMR - 9.1 kg ________________________________________ VTSbest 60' : 2.272 best 1/8 ET : 9.375 @ 74.42mph best 1/4 ET: 14.603 @ 97.047mph Team Trackday™ |
|
Posted 6th Apr 2009 at 01:28
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.